1/8 Scale Outlaw Nitro
Must have carburetor return spring
Any single engine sized .21 or larger (Nitro engine only)
Approved Body list:
A+ one piece
C&M “Atomic SC”, “Assassin” & “Atomic”
Losi # losa8096
OFNA # 31143
Onstat LM B-1 and B-2
RJ Speed 1/8 Dirt Oval Body
RJ Speed Mega Wedge 1/8 Dirt Oval Body
Setser SS Late Model Body
MACH 1 2014
MACH 1 2015
1) Rear spoiler 3” max length
2) Left side dam-starting edge may begin from center of front axle with wheels straight to rear spoiler
and cannot extend past the rear spoiler. Maximum height of side dam can be 5”, must have
two attachment points at least 8” apart. Must be clear and free of paint or stickers.
4) No additional wings, spoilers, flaps, etc can be added except what is stated in the rules.
5) No Metal is allowed to be added to any body, bumpers, wings or used as supports.
6) Bumpers must be made of shock absorbing material (no metal) and must be completely
covered by the body.
1) Max track width 12.375”
2) No part of nerf wings or chassis may extend past the plane of the tires
3) MIN Wheel Base 12.375"
1) 4 wheel Drive only
2) Must use standard 3 diff setup (rear/center/front) with shafts connecting front to center and
Rear to center. Each of the 3 diffs may house either a diff, locker, torsen, spool, one-way, 1 speed
no 2 speed transmission.
1) Tracks choice on which tires are legal (Foam or Rubber) from approved tire list!
2) All wheels must be 17mm buggy based.
Foam tire specs:
Max tire diameter- 106mm Max tire width- 46mm
ANY GT OR 1/8 SCALE STREET TREAD 17MM TIRE